$2,000.00 $3,200.00
| /
CLEARANCE
These power amps were pulled from a working environment. All power amps had their firmware updated to V3.0.2.15 and include only those accessories shown in the pictures.
Pictures are only of one of the units available so the unit you receive may not have the same exact blemishes. They are all in excellent condition with some scratches and scuffs (like the one pictured), but nothing major.
The power amps have clocked in 247 days or less of being in operation/use.
We are an authorized LEA dealer. Warranty does not transfer to the new owner, but rest assured that we have used LEA power amps for years in our installations and these have been tested and determined to be in good working order.
If you have any questions, please reach out to us. Additional information about the units can be found below.
System installers in search of a professional audio amplifier with Dante and wireless networking capabilities will be thrilled with the LEA Professional 704D Connect Series, a 700W 4-channel audio amplifier equipped with a web browser-based user interface that works on any device with no software to download.
The amplifier is well suited for small- to medium-scale installations and features direct Hi-Z (70 or 100V) or Lo-Z selectable by channel. Connect via the built-in wireless access point or via venue's Wi-Fi or use the FAST Ethernet to connect to any local area network (LAN) with a standard Cat 5/6 cable. The Dante Connect Series is the first professional amplifier family to feature Cloud connectivity, which allows you to remote control, monitor, get notifications, and more from any personal device. Connect the 704D to a network and start commanding your system from anywhere.
|
AUDIO SPECIFICATIONS
|
|
|---|---|
|
INPUTS
|
Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
Dante: 8 x 8 Dante at 96kHz or 48kHz, Multicast or Unicast AES 67: Configurable via the Dante Controller Software |
|
THD+N
|
0.1% (20Hz to 20kHz)
|
|
FREQUENCY RESPONSE
|
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
|
|
SIGNAL TO NOISE LEVEL
|
105dB (20Hz to 20kHz referenced to 8Ω)
|
|
CROSSTALK
|
70dB (20Hz to 20kHz)
|
|
AMPLIFIER OUTPUT CLASSIFICATION
|
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
|
|
DSP
|
|
|---|---|
|
DSP ARCHITECTURE
|
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
|
|
INPUT MATRIX
|
Routable matrix; any input to any output with primary and secondary input priority
|
|
CROSSOVERS
|
Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
|
|
PARAMETRIC EQ
|
8 Band Parametric EQ per channel
|
|
OUTPUT DELAY
|
100ms per channel
|
|
OUTPUT PROTECTION
|
DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
|
|
USER ADJUSTABLE LIMITING
|
Peak Voltage and RMS Voltage
|
|
LOAD MONITORING
|
Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
|
|
CONTROL, MONITORING, NETWORKING
|
|
|---|---|
|
USER INTERFACE
|
Web Browser User Interface, 3rd Party API control, or CLOUD control
|
|
EXTERNAL I/O
|
External I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health |
|
OPERATION
|
|
|---|---|
|
AC MAINS
|
100VAC - 240VAC +/- 15% 50Hz or 60Hz
|
|
POWER SUPPLY
|
Universal Switch Mode Power Supply with Power Factor Correction
|
|
PHYSICAL SPEC
|
|
|---|---|
|
DIMENSIONS (L X W X H)
|
Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm) |
|
WEIGHT
|
14lbs / 4kg | Shipping: 18.7lbs / 8.5kg
|
|
COOLING
|
Front to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m Fan Noise at 50% is 57dB @1m Fan Noise at full speed is 63dB @ 1m |
