Dynacord L1300FD 2-Channel 650W DSP Power Amplifier

• Professional DSP amplifier for live and mobile application
• Fully integrated professional speaker processing with FIR drive technology
• Market-leading acoustic performance and rock solid reliability
• Intuitive, simplified set-up, control and operation in SONICUE sound system software with firmware 2.0

Dynacord L Series are professional dual channel audio amplifiers for live and mobile applications. Integrated digital signal procesing provides access to professional speaker processing with FIR Drive technology. L Series amplifiers utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of mobile applications. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.

Specifications

• Load Impedance: 2, 2.6, 4, 8 Ohms
  
• Maximum Output Power, Single Channel:
  • 2 Ohm = 1100W 
  • 2.6 Ohm = 950W 
  • 4 Ohm = 660W 
  • 8 Ohm = 350W
• Maximum Output Power, Dual Channel:
  • 2 Ohm = 1000W 
    
  • 2.6 Ohm = 850W
  • 4 Ohm = 600W
  • 8 Ohm = 320W
• Maximum Output Power, Bridged:
  • 4 Ohm = 2000W 
    
  • 8 Ohm = 1200W
• Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V
• Voltage Gain ref.1 kHz: 32.0 dB
• IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
• DIM 30: < 0.05% (3.15 kHz, 15 kHz)
• Maximum Input Level: +21 dBu
• Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4Ω)
• Frequency Response: 10 Hz to 21 kHz (±1 dB)
• Input Impedance, active balanced: 20kΩ
• Signal-to-Noise Ratio (A-weighted): > 104 dB
• Output Noise , A-weighted: < -68 dBu
• Output Stage Topology: Class AB
• Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
• Power Consumption: 550 W (Maximum Output Power @4Ω)
• Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, In rush current limiters, Turn on delay
• Cooling: Front-to-rear, 3-stage-fans
• Safety Class: I
• Available Color: Black
• Dimensions (H x W x D): 3.46" x 19.02" x 18.2" (88 x 483 x 462.4mm)
• Weight Net: 28.44 lbs. (12.9 kg)
• Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
• Mains Fuse: 240 V/230 V: T10AH; 120 V/100 V: T20AH
• Operating Temperature Range: 40°F to +105°F (+5°C to +40°C)
• Total Harmonic Distortion: < 0.05% (at 450 W/4Ω MBW = 80 kHz, 1 kHz)